Integrated planetary rotary actuator · Model 1 highlights

110 Nm peak planetary robot actuator, 18:1 ratio: MGA-PJ-85-17-18

This 18:1 planetary model lists CAN and EtherCAT as standard communication support. Model 1 gives 33 Nm rated torque, 110 Nm under “Peak torque (>3 s)” and 160 rpm peak speed. Specify the controller interface and winding version, including any request for the separately mentioned 100 KV build.

MGA-PJ-85-17-18 integrated planetary joint actuator, three-quarter product view on a white background.
MGA-PJ-85-17-18 product view. The image is used as a visual reference; confirm the exact configuration before design release.

Model 1 summary

Start with the published torque, speed, mass, and ratio

These highlights describe Model 1. Compare the configuration tables below with the load cycle, mounting and controller requirements.

Peak torque (>3 s)
110 Nm
Peak speed
160 RPM
Weight
1100 g
Reduction ratio
18

Standard model and model-specific options

Start with the listed planetary configuration and its model-specific options. Describe the interface or function that needs to change so the build, drawing and applicable limits can be reviewed together.

  • Standard configuration has no through-bore and does not support a brake.
  • Standard communication supports CAN bus and EtherCAT.
  • For the 100 KV version, request its exact configuration, electrical data, drawing and lead time.
  • The standard configuration has no water-resistance protection. Contact sales before ordering if needed.

Request a configuration review

Describe the interface or function you would like to adjust, along with the application requirements. We can check whether a listed option or another configuration is available for this model. The exact build, drawing, and applicable limits need confirmation before an order.

  • Required continuous torque, peak torque, peak duration, and repetition rate
  • Output speed, acceleration, reversal, impact, and duty cycle
  • Mounting face, bolt pattern, shaft/bore, cable route, and external loads
  • Supply voltage, control mode, communication, feedback, brake, and protection requirements
Ask about this model's options

MGA-PJ-85-17-18 technical specifications

The listed build is Model 1. Request a configuration review if the duty or interfaces need to change. Unspecified cells are marked “Not specified.”

Motor electrical
ParameterUnitModel 1Model 2
Operating voltageV12-72Not specified
Rated voltageV48Not specified
Rated torqueNm33Not specified
Rated speedRPM100Not specified
Rated currentA(rms)11Not specified
Peak torque (>3 s)Nm110Not specified
Peak speedRPM160Not specified
Peak currentA(rms)42Not specified
Torque constantNm/A3.06Not specified
Back-EMF constantVrms/KrpmNot specifiedNot specified
Speed constantrpm/V60Not specified
Motor constantNm/√WNot specifiedNot specified
Electromechanical time constantmsNot specifiedNot specified
Electrical time constantmsNot specifiedNot specified
Pole pairs—14Not specified
Winding connection—StarNot specified
Phase resistanceΩ0.28Not specified
Phase inductancemH0.27Not specified
Mechanical
ParameterUnitModel 1Model 2
Reduction ratio—18Not specified
Reducer backlashArcmin10Not specified
Output bearing—Crossed-roller bearingNot specified
Backdrive torqueNm1.2Not specified
Rotational inertiag.cm²Not specifiedNot specified
Weightg1100Not specified
Axial loadkN7.9Not specified
Radial loadkN3.5Not specified
Control and interface
ParameterUnitModel 1Model 2
Control bandwidthHz2000Not specified
Communication—CANNot specified
Encoder type—Mechanical dual encoderNot specified
Encoder resolutionbit14Not specified
CAN interface—XT30(2+2)PW-MNot specified
USB interface—SH1.0-4PNot specified
Power interface—XT30(2+2)PW-MNot specified
Control modes—Servo mode; Speed mode; Torque mode; Force-position hybrid modeNot specified
Protection functions—Overvoltage protection; Overcurrent protection; Overtemperature protectionNot specified
Environment
ParameterUnitModel 1Model 2
Duty type—S2Not specified
Ingress protection—IP40Not specified
Cooling method—IC410Not specified
Ambient operating temperature—-20℃~50℃Not specified
Insulation class—FNot specified
Dielectric strength—500V 1kHz 1A 1msNot specified
Insulation resistance—100MΩ 20℃Not specified
Noise—60dB/1.0mNot specified
Temperature sensor—NTC MF52B 103F3950Not specified

All data are provided for U= 48 V and T= 25°C, unless otherwise specified. Specifications for different voltage levels or other operating limits, and corresponding simulation models, are available upon request.

Have a torque-speed profile or mounting drawing?

Send it with the duty cycle and controller requirements for a model-specific engineering review.

Start an Engineering Review

01 · Screen the duty

Match torque and speed over time

Compare rated and peak values with the actual motion profile, including peak duration, repetition, acceleration, and thermal conditions. Do not size from peak torque alone.

02 · Check interfaces

Resolve the mechanical and electrical stack

Compare the original drawing with the mating parts, loads, cable route, connectors, supply, communication protocol, and feedback requirements.

03 · Confirm the build

Match the build and acceptance conditions

Confirm the selected Model 1/Model 2 configuration, current drawing revision, option content, test conditions, and validation evidence before freezing a design.

Original drawing and motor performance map

Check mounting and cable clearances in the original 2D drawing. Review the torque, speed, power, current and efficiency map with the selected configuration; confirm curve identities and test conditions before using it for controller or thermal sizing. Open either image for a larger view.

MGA-PJ-85-17-18 original 2D technical drawing showing dimensioned mounting and housing views; source image used unchanged.
Original 2D drawing reproduced unchanged. Confirm revision, tolerances, and mating interfaces before production use.
MGA-PJ-85-17-18 source motor performance map with torque in Nm, speed in rpm, power in W, current in A, and efficiency in percent.
Source motor performance map. Curve labels/configuration are not identified in the graphic; confirm which configuration and operating limits apply before design closure.

Need this model in your CAD assembly?

A STEP file is available for this model on request. The email includes the public SKU and asks you to identify the required configuration.

Request STEP file by email

Compare related rotary actuator configurations

Compare the rated duty, ratio and interfaces of these related models before choosing a configuration for quotation.

Make the first review specific

Connect the published specifications with your mechanism. Share the fixed interfaces and open design questions so the next review can focus on the required configuration and prototype decisions.

  • Target continuous and peak output torque, including duration and cycle rate
  • Required output speed, acceleration, reversals, and duty type
  • Mounting drawing, mating parts, bore/shaft, cable path, and external loads
  • Supply voltage, drive/controller, protocol, encoder, brake, and protection needs
  • Ambient temperature, contamination, shock, noise, and service-life targets
  • Prototype or production stage, quantity range, destination, and validation plan

Add a torque measurement requirement

Use MGA-PJ-85-17-18 as the actuator reference for an output-torque sensing review. Define the sensor location, load path, bearing support, mounting and readout before selecting the combined configuration.

MGA-PJ-85-17-18 frequently asked questions

Are CAN and EtherCAT standard on this model?

The feature specification lists CAN and EtherCAT as standard support; the communication row records CAN. Identify the required interface, connector and controller in the enquiry so the quoted configuration and documentation match. Request separate data for a 100 KV build.

Do dual encoders mean the actuator includes a torque sensor?

Dual encoders provide motion feedback. Check their locations and interfaces for the selected configuration. A separate output-torque measurement needs its own sensor arrangement, load path and applicable calibration records. An engineered elastic element with position sensing can also measure torque; the label “dual encoder” alone does not establish that design.

Is encoder resolution the same as positioning accuracy?

Model 1 lists 14 bit encoder resolution. Resolution describes measurement increments. Installed positioning accuracy also depends on encoder performance, mounting, the transmission and control system. Use the configuration and conditions of a position test rather than interpreting a bit count as an angular-accuracy guarantee.

Can I request MGA-PJ-85-17-18 together with torque sensing?

Use MGA-PJ-85-17-18 as the actuator reference and share the required torque measurement point, mounting drawing, operating loads and readout. Review the combined mechanical and measurement configuration as a development project, with its sensor, mounting and acceptance scope defined together.

What torque and speed does MGA-PJ-85-17-18 list?

Model 1 lists 33 Nm rated torque and 110 Nm under “Peak torque (>3 s),” with 100 RPM rated speed and 160 RPM peak speed. Check the torque-speed profile and repetition of each load against the operating conditions below. These figures are separate parameters, not a simultaneous operating point.

What do Model 1 and Model 2 mean?

The specifications describe Model 1. Model 2 cells are unspecified; request a separate configuration review if the listed build needs to change.

What duty-cycle information is needed for selection?

Send torque and speed over time, peak duration and repetition, acceleration, dwell and cooling conditions. Include mounting loads and the controller interface so the rated and peak values can be reviewed against the complete cycle.

Which motor-performance-map curves apply to each configuration?

Use the map to frame the torque, speed, power, current and efficiency review. Request confirmation of the curve identities, configuration and test conditions before using a curve for controller or thermal sizing.

Application & assembly review

Review MGA-PJ-85-17-18 against your load, interface, and operating envelope

Share the torque-speed cycle, peak duration, mounting drawing and controller requirements. Include the prototype stage, quantity range and acceptance priorities to define the next configuration review.

Bring a sketch, selected components or the open interface questions. Use the review to define the assembly scope and next development step.